Buy New Camera flash gels colour correction Kit: 50 Lee Filters, 40mm x 140mm

A set of colour correction lighting gels to help photographers make the most of their hot-shoe mounted flashes.

This comprehensive kit of 50 gels pre-cut to approximately 40mm x 140mm contains:
5x Full Colour Temperature Blue (CTB Lee filters 201)
5x ½ Half Colour Temperature Blue (CTB Lee filters 202)
5x ¼ Quarter Colour Temperature Blue (CTB Lee filters 203)

5x Full Colour Temperature Orange (CTB Lee filters 204)
5x ½ Half Colour Temperature Orange (CTB Lee filters 205)
5x ¼ Quarter Colour Temperature Orange (CTB Lee filters 206)

5x Plus Green (Lee filters 244)
5x ½ Plus Green Lee (Lee filters 245)
5x ¼ Plus Green Lee (Lee filters 246)

5x One stop neutral density (0.3 ND Lee filters 203)

CTO (color temperature orange) gels make your flash appear to the camera as if it was a tungsten light bulb.

CTB (color temperature blue) gels can be used on tungsten light sources to balance them with the daylight colour of your flash.

Plus Green gels will help move your flash into the colour balance of fluorescent lamps.

Neutral density gel reduces the light output from your flash. This is useful for close up photography where the flash's minimum power setting is still too bright.

The pre-cut size of 40mm x 140mm is perfect for most Canon, Nikon & other flashes up to and including the Canon 580EX II.

You can attach these gels to your flash head using low tack tape, Amazon product code: B004UJV3TE. Or use our gel holder, Amazon product code: B004WVBHAA.
Flashes like the Canon 580EX or Nikon SB900 can produce a lot of heat when fired at full power. If you intend to use these flashes at full power then we recommend you use a gel holder to protect the gels, search for product code: B004WVBHAA.